| Ripper |
| Type | Single shank | 3 shank |
| Maximum dig below ground(mm) | 666 | 555 |
| Maximum lift above ground(mm) | 598.3 | 666 |
| Weight(kg) | 2560 | 2570 |
| ENGINE |
| Model | CUMMINS NT855-C280S10 |
| Type | straight vertical, four stroke, water cooling,PT pump injection, Turbocharged |
| Flywheel power(KW) | 162 |
| Rated speed(r/min) | 1800 |
| Number of cylinders-bore*stoke(mm) | 6-139.7*152.4 |
| Starting method | 24V, 11KW,Starting motor |
| Battery | 24V(12V*2)-195AH |
| Air cleaner | Dry horizontal type with pre-cleaner |
| Minimum fuel consumption ratio(min) | 218g/kw.h |
| Fuel tank | 450L |
| TRANSMISSION SYSTEM |
| Torque converter | 3-element, single-stage, single-phase |
| Transmission | Planetary gear, multiple-disc clutch, hydraulic actuated Forced lubrication by gear pump, 3 forward and 3 reverse speeds, electrical hydraulic control for model PY220Y-3 |
| Bevel gear | Helical bevel gear, splash lubricated |
| Steering clutch | Wet, multiple disc clutch, spring loaded, hydraulically released |
| Steering brake | Wet, band brake, operated with hydraulic booster and valve inner linkage |
| Final drive | Spur gear, double reduction, splash lubricated |
| TRACK |
| Type | Sealed single grouser |
| Track pitch(mm) | 216 |
| Track width(mm) | 560 |
| Number of track shoes(each side) | 38 |
| Length of track on ground(mm) | 2730 |
| Ground clearance(mm) | 405 |
| Track gauge(mm) | 2000 |
| HYDRAULIC SYSTEM OF WORK EQUIPMENT |
| Working pressure(Mpa) | 13.7 |
| Rated flow(L/min) | 257 |
| Pump | Gear pump |
| Control valve | Manual operated, plunger, servo controlling |
| Cylinder, bore*rod*stroke(mm) | 120*70*1054 |
| TRAVEL SPEED | 1st 2nd 3rd |
| Forward(km/h) | 3.6 6.5 11.2 |
| Reverse(km/h) | 4.3 7.7 13.2 |
| UNDER CARRIAGE |
| Sprocket | Segmented |
| Number of track rollers(each side) | 6(4 single, 2 double) |
| Track tension | Hydraulic adjusted |
| DIMENSION |
| Overall size(with ripper)(mm) | 7095(L)*3725(W)*3517(H) |
| Operating weight(kg) | 26300 |
